If living connect is placed where it its difficult to see the display or change the temperature, it is recommended to use a room sensor.
The open-window function is hidden so the user does not see it in use. It is activated by rapid changes in temperature and closes the valve. It is deactivated after 30 minutes or when the window is closed again.
living design does not have this feature.
It is possible to mount living connect and living eco on RA, RA/VL RA/V valves and any other valve fitting type M30x1.5
It is possible to mount living design on RA and valve fitting type M30x1.5.It is not possible to use living eco or living connect for FJVR valves since it requires a measurement of the return temperature of the water. living eco and living connect measure the room temperature.
Rechargeable batteries may perform at a lower voltage than regular alkaline batteries, which means that the radiator thermostats will not work properly with rechargeable batteries.
It is not recommended to use living eco in applications where the thermostat is hidden. The living connect can work in hidden radiator applications provided that
a) The living connect has software 3.02 or later (see software version on the label in the battery lid)
b) The Danfoss Link CC has software 2.5.57 or later
c) A Danfoss Link RS is connected to the room
d) The Heating Regulation in the Installation Mode of the Danfoss Link CC must be put on "Covered Radiator" or "Trench Heating"
It is possible to demount living eco and program it, but it is very important that the thermostat is placed in mounting mode when it is re-fitted on the radiator.
Currently it is not possible to control living connect by using mobile or PC.
Yes. If you change the temperature manually on one living connect, this will also apply to all the thermostats in the same room until the next time or temperature interval. This is smart, as it gives you optimised use-and-heating balance. living connects in other rooms are not affected.
Up to 10 living connects can be installed in a room. In total you can connect up to 30 living connect thermostats to a Danfoss Link CC.
The Danfoss Link™ CC system can be used in detached single-family homes of less than 300 m² with a maximum of 30 living connect® per Danfoss Link™ CC panel. Special conditions apply to residential apartments and terraced homes. Contact your local heating installer for more information.
Danfoss is a well-known brand and our products are available from professional heating installers. We recommend that you contact a professional installer for advice in choosing the right products and to ensure that they are installed correctly. Danfoss Link™ CC with Wi-Fi is sold in Germany, Denmark, Sweden, Finland, Poland, and more countries will come. Follow the links below to find specific information on where to buy.
You do not need to buy new valves to use living connect®. However, if you have old RA/V or RA/VL valves, we recommend replacing them with new Danfoss RA valves with presetting for optimum energy utilisation.
No.living eco® is an independent programmable thermostat and works as a stand-alone product only. It cannot communicate with Danfoss Link™ CC or other thermostats. Instead, you must use living connect® together with Danfoss Link™
You can connect up to 30 living connect® units to a Danfoss Link™ system.
NSU has a mains adapter for plugging into a power outlet and PSU has a built-in power supply for in-wall installation.
Yes, if you have the Wi-Fi version of Danfoss Link™ CC. You can download the App from either App Store or Google play.
For more information about Wi-Fi and App
A repeater extends and amplifies the wireless signal between two devices. This video shows when it is recommended to use a repeater.
When using living connect®, you can save up to 30% on your heat consumption, not your entire heating bill. Up to 30% is the average European saving potential.
living connect® was the first electronic thermostat ever to achieve the prestigious AA energy certificate from eu.bac
If, for instance, your home is connected to a district heating system, your expenses consist of a fixed fee along with variable heat consumption plus domestic hot water consumption. It is your actual heat consumption that can be reduced by up to 30%, given that the conditions are right.
Read more (pdf)
As a general rule, you can save 5% of energy consumption for every degree you lower the temperature at night.
A room sensor is the same as a remote sensor. The room sensor controls all the living connects attached in the room, all of which are automatically locked – and all temperature changes must be done on the room sensor or on Danfoss Link CC.
Contact our support professionals for expert advice, product information or general assistance. We will guide you as quickly as possible to the solutions you need.
Danfoss' radiator thermostats offer a comprehensive range of thermostats and valves for flexible solutions.
Are you interested in our products and solutions? Call us at +74 88 80 00 or contact us by e-mail.